Zyxel NWA5123-NI (8 Pack) no PSU Standalone + Controller Access Point (NWA5123-NI-EU0202F)

Quicklinx:	BW50WS00
Mfr#:	NWA5123-NI-EU0202F

Description

The ZyXEL NWA5123-NI 802.11 a/b/g/n Dual-radio Uniied AP consists of 2.4 GHz and 5 GHz dual-band radio to match the concurrent Wi-Fi services with either frequency. The higher frequency of the 5 GHz band provides a shorter signal range compared to the 2.4 GHz band with the same transmit output power. The NWA5123-NI consist of high 5 GHz transmit output power can boost the 5 GHz signal range, providing signal coverage equal to the 2.4 GHz wireless network. Therefore, the complexity of deployment can be considerably reduced.

Features

Ceiling-mount design blends into environments
Different from traditional business routers, the slick smoke detector ceiling-mount design of ZyXE NWA5120 series provides better coverage and performance. The NWA5120 series is a PoE AP with a multifunction design that solves all problems by offering internal as well as external antennas to enhance wireless performance and to eliminate coverage dead spots. Moreover, the signal outputs have been ine-tuned to provide easy RF planning and excellent signal coverage especially for hospitality and education environments. The ZyXEL NWA5120 series has been designed with plenum rating and made of non-toxic materials without hazardous emission the safe design makes it more suitable for public indoor wireless deployments.
Effortless conversion from standalone to centrally-managed
The ZyXEL NWA5120 series Unified APs can be configured as a fully functional standalone AP and also capable to work with Wireless LAN Controller to form a robust controller-based WLAN solution with centralized management when Wi-Fi demand grows, as well as auto AP provisioning over both LAN and WAN connections. After being installed and powered on, the APs automatically look for the wireless LAN controller and establish connections. Utilizing the CAPWAP protocol, connections can be established between the controller and APs without needing to change the existing LAN infrastructure.
Continuous wireless services for better reliability and network quality
The ZyXEL NWA5120 series 802.11n PoE AP features coverage-enhancing 11n technologies such as TX Beamforming, LDPC and MLD to eliminate issues of dead spots and incipient coverage. With MLD, the NWA5120 series boosts the Signal-to-Noise Ratio (SNR) to 3 dB for more stable wireless services and better performance. Meanwhile, TX beam forming also eliminates dead spots by expanding the coverage with continuous, dynamic changing of signal phases. With non-stop wireless services, the NWA5120 series provides reliable network connectivity for better business productivity.

Specifications

Summary

Product Description: Zyxel NWA5123-NI - radio access point - Wi-Fi

Device Type: Radio access point

Packaged Quantity: 8 (specifications are for single item)

Form Factor: In-ceiling

Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n

Frequency Band: 2.4 GHz, 5 GHz

Capacity: Maximum number of configured SSIDs: 8

Power Over Ethernet (PoE) Supported: PoE

Dimensions (WxDxH): 13 cm x 13 cm x 5.45 cm

Weight: 250 g

Detailed Specification

General

Packaged Quantity: 8 (specifications are for single item)

Device Type: Radio access point

Width: 13 cm

Depth: 13 cm

Height: 5.45 cm

Weight: 250 g

Networking

Form Factor: In-ceiling

Connectivity Technology: Wireless

Data Transfer Rate: 300 Mbps

Line Coding Format: 64 QAM, BPSK, QPSK, 16 QAM

Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n

Spread Spectrum Method: OFDM, DSSS

Remote Management Protocol: CLI

Frequency Band: 2.4 GHz, 5 GHz

Capacity: Maximum number of configured SSIDs: 8

Features: VLAN support, manageable, wall mountable, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), CAPWAP support, Low Density Parity Check (LDPC), Transmit Beam-forming (TxBF) ready, plenum-rated, DHCP client, ceiling mountable, Maximum Likelihood Demodulation (MLD)

Encryption Algorithm: TLS, PEAP, TTLS, WPA2, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, WEP

Authentication Method: RADIUS

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n

Aerial

Antenna: Internal

Antenna Qty: 4

Gain Level: 5 dBi

Expansion / Connectivity

Interfaces: 1 x 1000Base-T (PoE) - RJ-45

Miscellaneous

MTBF: 781,396 hour(s)

Compliant Standards: ETSI, BSMI, EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, FCC Part 15.247, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15 E, BSMI CNS 13438, EN 60601-1-2, BSMI CNS 14336, EN 300 328, EN 301 489-1, EN 301 893, EN 301 489-17

Power

Power Over Ethernet (PoE) Supported: PoE

Power Device: External power adapter (not included)

Environmental Parameters

Min Operating Temperature: 0 °C

Max Operating Temperature: 50 °C

Humidity Range Operating: 10 - 90% (non-condensing)