HPE HP 830 8P PoE+Wired WLAN Switch (JG641A)

Quicklinx:	9R02WS00
Mfr#:	JG641A

Description

The HPE 830 Unified Wired-WLAN Switch Series integrates both wireless controller and GbE switch functions. The switch series provides 1000 Mbps Ethernet ports, each supporting up to 30 W of PoE+ and manages IEEE 802.11a/b/g/n/ac APs to deliver unified access, consistent policy and RF optimization for your small to medium branch offices. The HPE 830 Unified Wired-WLAN Switch Series are part of the Hewlett Packard Enterprise Networking Mobility enterprise solution.

Features

Enhanced Performance and Unified Access for Branch Offices
The HPE 830 Unified Wired-WLAN Switch Series accommodates the growth of mobile devices by offering unified wired and wireless services in a single device, which can support up to 1000 wireless users and comes with 8 or 24 Gigabit Ethernet PoE+ ports.Supports both centralized and distributed forwarding options for unparalleled application performance and WLAN scalability.Offers a self-optimizing wireless network with Wi-Fi Clear Connect RF optimization, automatic interference mitigation and dynamic client load balancing for enhanced connectivity in dense client environments.Supports N+1, N+N redundancy, to provide continuity of services in branch offices.Provides granular access control policies based on Committed Access Rate (CAS), QoS profiles, SSID or access point location for user, application and BYOD initiatives.
Robust Security and Threat Protection
The HPE 830 Unified Wired-WLAN Switch Series provides integrated wireless intrusion detection and prevention and supports Virtual Service Domains to deploy security policies by department or location.Provides robust security and threat protection with support for embedded or external authentication servers and integrated Endpoint Admission Defense (EAD).Provides role or SSID based access through embedded firewall to protect clients from outside attacks and restrict access to specific network resources.
Reduced Total Cost of Ownership (TCO) and Simplified Management
The HPE 830 Unified Wired-WLAN Switch Series reduces TCO with a Limited Lifetime Warranty.Simplifies configuration, management and troubleshooting and policy enforcement for wired and wireless network with HPE single management tool.Reduces the cost of ownership by integrating wired and wireless connectivity in a single device eliminating the need to purchase separate wired and wireless access devices.
Performance
Flexible forwarding modes: supports both distributed and centralized forwarding mode; in a wireless network using centralized forwarding, all wireless traffic is sent to the HP 830 Unified Wired-WLAN Switch for processing; if the distributed mode is configured, authenticated clients can continue to access local resources in the event that connectivity to the HP 830 Unified Wired-WLAN Switch is lost.Fast roaming: supports Layer 3 roaming and fast roaming, satisfying the mostdemanding voice service requirements.
Scalability
Pay as you grow: license upgrades allow you to increase support for additional access points without the need to buy additional costly hardware and use additional valuable space in a rack.
Resiliency and high availability
High reliability: supports N+1 and N+N backup.

Specifications

Summary

Product Description: HPE 830 8-Port PoE+ Unified Wired-WLAN Switch - switch - 8 ports - Managed - rack-mountable

Device Type: Switch - 8 ports - Managed

Enclosure Type: Rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 8 x 10/100/1000 (PoE+) + 2 x Gigabit SFP

Power Over Ethernet (PoE): PoE+

PoE Budget: 180 W

Capacity: Manageable access points: 12 , Maximum number of users: 1000 , ACL entries: 2000 , Maximum number of configured SSIDs: 64

MAC Address Table Size: 8K entries

Jumbo Frame Support: Yes

Routing Protocol: RIP-1, RIP-2, IGMPv2, IGMP, static IPv4 routing, static IPv6 routing

Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI

Features: Flow control, Layer 2 switching, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, DiffServ support, IDS, IPv6 support, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, MLD snooping, EAD, STP Root Guard, fan tray, MAC address lockout

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at

Power: AC 120/230 V (50/60 Hz)

Dimensions (WxDxH): 44 cm x 27 cm x 4.36 cm

Weight: 4 kg

Detailed Specification

General

Device Type: Switch - 8 ports - Managed

Enclosure Type: Rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 8 x 10/100/1000 (PoE+) + 2 x Gigabit SFP

Power Over Ethernet (PoE): PoE+

PoE Budget: 180 W

Capacity: Manageable access points: 12 , Maximum number of users: 1000 , ACL entries: 2000 , Maximum number of configured SSIDs: 64

MAC Address Table Size: 8K entries

Jumbo Frame Support: Yes

Routing Protocol: RIP-1, RIP-2, IGMPv2, IGMP, static IPv4 routing, static IPv6 routing

Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI

Encryption Algorithm: AES, SSL, TLS, TKIP, WPA, WPA2, PKI, WEP

Authentication Method: RADIUS

Features: Flow control, Layer 2 switching, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, DiffServ support, IDS, IPv6 support, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, MLD snooping, EAD, STP Root Guard, fan tray, MAC address lockout

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at

Processor: 1: 750 MHz

RAM: 512 MB DDR2 SDRAM

Flash Memory: 1 GB

Expansion / Connectivity

Interfaces: 8 x 1000Base-T RJ-45 PoE+ - 30 W , 1 x console RJ-45 management , 2 x SFP (mini-GBIC)

Power

Power Device: Internal power supply

Voltage Required: AC 120/230 V (50/60 Hz)

Miscellaneous

Rack Mounting Kit: Included

Compliant Standards: CISPR 22 Class A, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, VCCI V-3 Class A ITE, VCCI V-4, EN 300 386, CAN/CSA-C22.2 No. 60950-1

Dimensions & Weight

Width: 44 cm

Depth: 27 cm

Height: 4.36 cm

Weight: 4 kg

Environmental Parameters

Min Operating Temperature: 0 °C

Max Operating Temperature: 45 °C

Humidity Range Operating: 5 - 95% (non-condensing)

Min Storage Temperature: -40 °C

Max Storage Temperature: 70 °C

Humidity Range Storage: 5 - 95% (non-condensing)

HPE HP 830 8P PoE+Wired WLAN Switch

Description

Features

Enhanced Performance and Unified Access for Branch Offices

Robust Security and Threat Protection

Reduced Total Cost of Ownership (TCO) and Simplified Management

Performance

Scalability

Resiliency and high availability

Specifications

Summary

Detailed Specification

General

Expansion / Connectivity

Power

Miscellaneous

Dimensions & Weight

Environmental Parameters

Cookies on BT Business Direct

About cookies

Functional cookies

Targeting cookies

Thanks, you're all set!

Your cookie settings