D-Link 26-Port PoE+ Gigabit Smart Managed Switch (DGS-1100-26MPV2)

Quicklinx:	J7KMWS00
Mfr#:	DGS-1100-26MPV2

Back

Description

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy-efficient technologies provide a flexible solution to meet your networking requirements.

Features

D-Link green/power-saving performance
The DGS-1100 Series consumes less energy by cutting down on power consumption when port utilization is low. By deploying compatible devices, users can cut operating costs and even cut down on additional cooling equipment, helping small and medium-sized businesses stay within their budgets. The DGS-1100 Series also features D-Link Green technology that helps save energy automatically. The switches monitor the link status of every port and significantly reduce power consumption of the interface when there is no link or network traffic detected.
Easy to deploy
The DGS-1100 Series supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface. The client-based D-Link Network Assistant (DNA) discovers all D-Link smart managed switches within the same layer 2 network segment, making the initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switches to be controlled from any PC that is connected to the network.
Surveillance VLAN and Bandwidth Control
The DGS-1100 Series supports surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This ensures security and guarantees the quality of the video traffic, sparing businesses the added cost of dedicated surveillance hardware. Bandwidth Control can reserve bandwidth on a per-port basis for important functions that require larger bandwidth or have higher priority.
Advanced features
The DGS-1100 Series is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC whitelist for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.
Easy troubleshooting
The DGS-1100 Series features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

Specifications

Summary

Product Description: D-Link DGS 1100-26MPV2 - switch - 26 ports - smart - rack-mountable

Device Type: Switch - 26 ports - smart

Enclosure Type: Rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP

Power Over Ethernet (PoE): PoE+

PoE Budget: 370 W

Performance: Switching capacity: 52 Gbps , Forwarding performance: 38.69 Mpps

MAC Address Table Size: 8K entries

Routing Protocol: IGMPv2, IGMP, IGMPv3

Remote Management Protocol: SNMP 2, ICMP

Features: Flow control, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, Broadcast Storm Control, full duplex mode, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, QoS, Cable Diagnostics Function, bandwidth control, LLDP support, Port Security, DHCP client, tagged VLAN, DSCP support, 4.1MB packet buffer, IGMP querier, Voice VLAN, VLAN management, VLAN group, EEE, WRR, HOL Blocking Prevention, loopback detection, port-based VLAN, port-based QoS, Unknown Storm Control, DNA support, Asymmetric VLAN, Smart Fan

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3at, IEEE 802.3az

Power: AC 120/230 V (50/60 Hz)

Dimensions (WxDxH): 44 cm x 20.8 cm x 4.4 cm

Weight: 2.8 kg

Detailed Specification

General

Device Type: Switch - 26 ports - smart

Enclosure Type: Rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP

Power Over Ethernet (PoE): PoE+

PoE Budget: 370 W

Performance: Switching capacity: 52 Gbps , Forwarding performance: 38.69 Mpps

MAC Address Table Size: 8K entries

Routing Protocol: IGMPv2, IGMP, IGMPv3

Remote Management Protocol: SNMP 2, ICMP

Features: Flow control, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, Broadcast Storm Control, full duplex mode, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, QoS, Cable Diagnostics Function, bandwidth control, LLDP support, Port Security, DHCP client, tagged VLAN, DSCP support, 4.1MB packet buffer, IGMP querier, Voice VLAN, VLAN management, VLAN group, EEE, WRR, HOL Blocking Prevention, loopback detection, port-based VLAN, port-based QoS, Unknown Storm Control, DNA support, Asymmetric VLAN, Smart Fan

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3at, IEEE 802.3az

Flash Memory: 16 MB

Status Indicators: Power, status, PoE, link/activity/speed

Expansion / Connectivity

Interfaces: 24 x 1000Base-T RJ-45 PoE+ , 2 x Gigabit LAN RJ-45/SFP

Power

Power Device: Internal power supply

Voltage Required: AC 120/230 V (50/60 Hz)

Power Consumption Operational: 454.1 Watt

Power Consumption Stand by: 15.2 Watt

Miscellaneous

Included Accessories: 11" rack mounting kit

Rack Mounting Kit: Included

MTBF: 317,777 hours

Compliant Standards: FCC Class A certified, C-Tick, BSMI, cUL, CB, CCC, LVD, VCCI Class A

Dimensions & Weight

Width: 44 cm

Depth: 20.8 cm

Height: 4.4 cm

Weight: 2.8 kg

Environmental Parameters

Min Operating Temperature: -10 °C

Max Operating Temperature: 50 °C

Humidity Range Operating: 0 - 95% (non-condensing)

Min Storage Temperature: -40 °C

Max Storage Temperature: 70 °C

Humidity Range Storage: 0 - 95% (non-condensing)

Find similar

Not quite found what you are looking for? You can find products which may be more suitable by simply checking the features that interest you and clicking the find button.


	Brand: D-Link
	Price Range Ex VAT: £150 - £300
	Stock Status: Ordered upon request