Cisco Catalyst 3850 24 Port GE SFP IP Base (WS-C3850-24S-S)

Quicklinx:	DJG8WS00
Mfr#:	WS-C3850-24S-S

Back

Description

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired and wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), modular and field-replaceable network modules, redundant fans and power supplies.

Features

Converged wired plus wireless access
The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular QoS, security, and Flexible Netflow (FNF) across wired and wireless in a seamless fashion.
Flexible NetFlow (FNF)
Full visibility into the wired plus wireless traffic is achieved because of the access point Control and Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users and user traffic flows in order to identify potential attackers and take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering and exiting the switch stack for wired and wireless users. It also helps identify the top wired/wireless talkers and enforce appropriate bandwidth provisioning policies.
Advanced wired plus wireless QoS capabilities
The 3850 switch has advanced wired plus wireless QoS capabilities. It uses the Cisco modular QoS command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level and drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage and prioritize available bandwidth between various radios and various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID.
Provides a rich set of security features
The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard and control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users and attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or QoS policies can be defined and applied using the ISE for each of these sessions, providing better control on the devices connecting to the network.

Specifications

Summary

Product Description: Cisco Catalyst 3850-24S-S - switch - 24 ports - Managed - rack-mountable

Device Type: Switch - 24 ports - L3 - Managed - stackable

Enclosure Type: Rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x Gigabit SFP

Performance: Switching capacity: 92 Gbps , Stacking bandwidth: 480 Gbps , Forwarding performance: 68.4 Mpps

Capacity: IPv4 routes: 24000 , NetFlow entries: 24000 , Switched virtual interfaces (SVIs): 1000

MAC Address Table Size: 32000 entries

Jumbo Frame Support: 9198 bytes

Routing Protocol: RIP-1, RIP-2, EIGRP, RIPng

Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI

Features: DHCP support, auto-negotiation, ARP support, Syslog support, IDS, full duplex mode, RSTP support, MSTP support, DHCP snooping, DTP support, PAgP support, ACL support, QoS, DHCP server, DAI, Cisco StackWise Technology, URPF, UDLD, Rapid PVST+, SRR, LACP, Port Security, RSPAN, CAPWAP support, HSRP support, MIB, VRF, WIPS, CoS, Cisco StackPower technology, FNF, FTP client, DSCP support, Storm Control, IP source guard, WTD

Compliant Standards: IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s

Power: AC 120/230 V (50/60 Hz)

Power Redundancy: Optional

Dimensions (WxDxH): 44.5 cm x 45 cm x 4.45 cm

Weight: 7.03 kg

Manufacturer Warranty: Limited lifetime warranty

Detailed Specification

General

Device Type: Switch - 24 ports - L3 - Managed - stackable

Enclosure Type: Desktop, rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x Gigabit SFP

Performance: Switching capacity: 92 Gbps , Stacking bandwidth: 480 Gbps , Forwarding performance: 68.4 Mpps

Capacity: IPv4 routes: 24000 , NetFlow entries: 24000 , Switched virtual interfaces (SVIs): 1000

MAC Address Table Size: 32000 entries

Jumbo Frame Support: 9198 bytes

Routing Protocol: RIP-1, RIP-2, EIGRP, RIPng

Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI

Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features: DHCP support, auto-negotiation, ARP support, Syslog support, IDS, full duplex mode, RSTP support, MSTP support, DHCP snooping, DTP support, PAgP support, ACL support, QoS, DHCP server, DAI, Cisco StackWise Technology, URPF, UDLD, Rapid PVST+, SRR, LACP, Port Security, RSPAN, CAPWAP support, HSRP support, MIB, VRF, WIPS, CoS, Cisco StackPower technology, FNF, FTP client, DSCP support, Storm Control, IP source guard, WTD

Compliant Standards: IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s

RAM: 4 GB

Flash Memory: 2 GB

Status Indicators: Power

Expansion / Connectivity

Interfaces: 24 x 1000Base-X SFP , 1 x USB Type A , 1 x management (mini-USB) Type B , 1 x serial (RS-232) RJ-45 management , 1 x management (Gigabit LAN) RJ-45 , 2 x network stack device

Expansion Slots: 1 (total) / 1 (free) x Stacking Module

Power

Power Device: Internal power supply

Installed Qty: 1

Max Supported Qty: 2

Power Redundancy: Optional

Power Redundancy Scheme: 1+1 (with optional power supply)

Power Provided: 350 Watt

Voltage Required: AC 120/230 V (50/60 Hz)

Miscellaneous

MTBF: 300,760 hours

Compliant Standards: CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, CNS 13438(95) Class A, KN22 Class A, AS/NZS CISPR22:2004 Class A, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1

Software / System Requirements

Software Included: Cisco IOS IP Base

Dimensions & Weight

Width: 44.5 cm

Depth: 45 cm

Height: 4.45 cm

Weight: 7.03 kg

Manufacturer Warranty

Service & Support: Limited warranty - advance parts replacement - lifetime - response time: next business day , Technical support - consulting - 90 days

Environmental Parameters

Min Operating Temperature: -5 °C

Max Operating Temperature: 45 °C

Humidity Range Operating: 10 - 95% (non-condensing)

Min Storage Temperature: -40 °C

Max Storage Temperature: 70 °C