Cisco Catalyst 2960X-24TD-L Switch (WS-C2960X-24TD-L)

Quicklinx:	95B9WS00
Mfr#:	WS-C2960X-24TD-L

Description

Cisco Catalyst 2960-X series switch is the next generation of the world's most widely deployed access switches. It enables intelligent services such as application visibility; smart operations layer 3 routing and deliver best-in-class energy efficiency with up to 80 percent energy savings.

Features

ETHERNET PORT CONFIGURATION
24 10/100/1000 Gigabit Ethernet ports, two 10 G SFP+ uplink ports
DEVICE MANAGEMENT
Web UI, over-the-air access via Bluetooth and CLI (command-line interface)
CONSOLE ACCESS
SNMP (Simple Network Management Protocol) and RJ-45 or USB console access
SECURITY
802.1X, Switched Port Analyser (SPAN) and Bridge Protocol Data Unit (BPDU) Guard
PEACE OF MIND
Enhanced limited lifetime warranty

Specifications

Summary

Product Description: Cisco Catalyst 2960X-24TD-L - switch - 24 ports - Managed - rack-mountable

Device Type: Switch - 24 ports - Managed - stackable

Enclosure Type: Rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x 10/100/1000 + 2 x SFP+

Performance: Switching capacity: 216 Gbps , Forwarding performance (64-byte packet size): 95.2 Mpps

Capacity: Active VLANs: 1023

Jumbo Frame Support: 9216 bytes

Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI

Features: Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, MSTP support, DHCP snooping, DTP support, PAgP support, TFTP support, ACL support, QoS, MLD snooping, DAI, Cisco EnergyWise technology, URPF, UDLD, Rapid PVST+, SRR, LLDP support, DHCP relay, LACP, MAC Address Notification, RSPAN, HSRP support, Energy Efficient Ethernet, MIB, MVR, SPQ, CoS, Cisco FlexStack Plus, DSCP support

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX

Power: AC 120/230 V (50/60 Hz)

Power Redundancy: Optional

Dimensions (WxDxH): 44.5 cm x 27.9 cm x 4.5 cm

Weight: 4 kg

Manufacturer Warranty: Limited lifetime warranty

Detailed Specification

General

Device Type: Switch - 24 ports - Managed - stackable

Enclosure Type: Desktop, rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x 10/100/1000 + 2 x SFP+

Performance: Switching capacity: 216 Gbps , Forwarding performance (64-byte packet size): 95.2 Mpps

Capacity: Active VLANs: 1023

Jumbo Frame Support: 9216 bytes

Max Units In A Stack: 8

Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI

Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features: Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, MSTP support, DHCP snooping, DTP support, PAgP support, TFTP support, ACL support, QoS, MLD snooping, DAI, Cisco EnergyWise technology, URPF, UDLD, Rapid PVST+, SRR, LLDP support, DHCP relay, LACP, MAC Address Notification, RSPAN, HSRP support, Energy Efficient Ethernet, MIB, MVR, SPQ, CoS, Cisco FlexStack Plus, DSCP support

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX

Processor: 1 APM86392: 600 MHz

RAM: 512 MB

Flash Memory: 128 MB

Status Indicators: Port transmission speed, port duplex mode, system, status, RPS (Redundant Power Supply), link/activity

Expansion / Connectivity

Interfaces: 24 x 1000Base-T RJ-45 , 1 x console RJ-45 management , 1 x mini-USB Type B management , 1 x USB Type A , 1 x management (Gigabit LAN) RJ-45 , 2 x SFP+ uplink

Expansion Slots: 1 (total) / 1 (free) x Stacking Module

Power

Power Device: Internal power supply

Power Redundancy: Optional

Voltage Required: AC 120/230 V (50/60 Hz)

Power Consumption Operational: 24.9 watt

Features: Redundant Power System (RPS) connector

Miscellaneous

MTBF: 569,520 hours

Compliant Standards: CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, RoHS 2011/65/EU, EN 300386

Software / System Requirements

Software Included: Cisco IOS LAN Base

Dimensions & Weight

Width: 44.5 cm

Depth: 27.9 cm

Height: 4.5 cm

Weight: 4 kg

Manufacturer Warranty

Service & Support: Limited warranty - replacement - lifetime - response time: next business day , Technical support - consulting - 90 days

Environmental Parameters

Min Operating Temperature: -5 °C

Max Operating Temperature: 45 °C

Humidity Range Operating: 10 - 95% (non-condensing)

Min Storage Temperature: -25 °C

Max Storage Temperature: 70 °C

Humidity Range Storage: 10 - 95% (non-condensing)

Cisco Catalyst 2960X-24TD-L Switch