D-Link D-Link 24-ports 10Gigabit SFP+ Layer 3 Data Center Switch (DXS-3600-32S/SI)

Type:	10 Gigabit Ethernet
Ports:	24
Data Transfer Rate:	10Gbps
Managed:	Yes
POE:	No

Quicklinx:	82N6WS00
Mfr#:	DXS-3600-32S/SI

Back

Description

D-Link's DXS-3600 Series Top-of-Rack 10 Gigabit Stackable Managed Switch consists of compact, high-performance switches that feature 10 Gigabit Ethernet switching, routing, and very low latency.

Features

Data center features
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The DXS-3600 switches support several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, and IEEE 802.1Qau. IEEE 802.1Qbb (Priority Based Flow Control) provides flow control to ensure there is no data loss during network congestion. IEEE 802.1Qaz (Enhanced Transmission Selection) manages the allocation of bandwidth amongst different traffic classes. IEEE 802.1Qau (Congestion Notification) provides congestion management for data flows within network domains to avoid congestion. The DXS-3600 switches also support cut-through switching, which reduces latency in transmitting data in a network.
Energy efficient
The DXS-3600 switches allow users to change the airflow by using different power and fan module sets. Selectable front-to-back or back-to-front airflow maximizes air cooling to provide more effective cooling throughout rack systems in data centers, where the switches are used, compared to side-to-side airflow. The switches also feature built-in smart fans; internal heat sensors monitor and detect temperature change, and react accordingly by utilizing different fan speeds for different temperatures. At lower temperatures, the fans will run slower and reduce the switch's power consumption and noise.

Specifications

Summary

Product Description: D-Link Data Center 10GbE Top-of-Rack Switch DXS-3600 - switch - 24 ports - Managed - rack-mountable

Device Type: Switch - 24 ports - Managed - stackable

Enclosure Type: Rack-mountable 1U

Subtype: 10 Gigabit Ethernet

Ports: 24 x 10 Gigabit SFP+

Performance: Switching capacity: 960 Gbps

Capacity: IGMP groups: 4000

MAC Address Table Size: 128K entries

Jumbo Frame Support: 12KB

Routing Protocol: IGMPv2, IGMP, IGMPv3

Remote Management Protocol: SNMP, RMON, Telnet, HTTP, SSH, CLI

Features: Flow control, DoS attack prevention, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Access Control List (ACL) support, Quality of Service (QoS), Safeguard Engine, LLDP support, Port Security, Data Center Bridging (DCB)

Compliant Standards: IEEE 802.1p, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz

Power: AC 120/230 V (50/60 Hz)

Power Redundancy: Optional

Dimensions (WxDxH): 44 cm x 50.6 cm x 4.4 cm

Weight: 9.8 kg

Detailed Specification

General

Device Type: Switch - 24 ports - Managed - stackable

Enclosure Type: Rack-mountable 1U

Subtype: 10 Gigabit Ethernet

Ports: 24 x 10 Gigabit SFP+

Performance: Switching capacity: 960 Gbps

Capacity: IGMP groups: 4000

MAC Address Table Size: 128K entries

Jumbo Frame Support: 12KB

Max Units In A Stack: 4

Routing Protocol: IGMPv2, IGMP, IGMPv3

Remote Management Protocol: SNMP, RMON, Telnet, HTTP, SSH, CLI

Encryption Algorithm: SSL

Authentication Method: RADIUS, TACACS+

Features: Flow control, DoS attack prevention, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Access Control List (ACL) support, Quality of Service (QoS), Safeguard Engine, LLDP support, Port Security, Data Center Bridging (DCB)

Compliant Standards: IEEE 802.1p, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz

Status Indicators: Port transmission speed, power, link/activity, fan, console

Expansion / Connectivity

Interfaces: 24 x 10Gb Ethernet - RJ-45 , 1 x management RJ-45

Expansion Slots: 1 (total) / 1 (free) x Expansion Slot , 1 (total) / 1 (free) x SD Memory Card

Installed Modules Qty (Max): 0 (installed) / 1 (max)

Power

Power Device: Internal power supply - hot-plug

Installed Qty: 1

Max Supported Qty: 2

Power Redundancy: Optional

Power Redundancy Scheme: 1+1 (with optional power supply)

Voltage Required: AC 120/230 V (50/60 Hz)

Miscellaneous

Compliant Standards: VCCI, C-Tick, cUL, CB, IC, FCC, LVD

Software / System Requirements

Software Included: Standard Image (SI) Software

Dimensions & Weight

Width: 44 cm

Depth: 50.6 cm

Height: 4.4 cm

Weight: 9.8 kg

Environmental Parameters

Min Operating Temperature: 0 °C

Max Operating Temperature: 45 °C

Humidity Range Operating: 0 - 95%

Min Storage Temperature: -40 °C

Max Storage Temperature: 70 °C

Humidity Range Storage: 0 - 95%

Find similar

Not quite found what you are looking for? You can find products which may be more suitable by simply checking the features that interest you and clicking the find button.


	Type: 10 Gigabit Ethernet
	Ports: 24
	Data Transfer Rate: 10Gbps
	Managed: Yes
	POE: No
	Brand: D-Link
	Price Range Ex VAT: £1500+
	Stock Status: Ordered upon request

D-Link D-Link 24-ports 10Gigabit SFP+ Layer 3 Data Center Switch

Description

Features

Data center features

Energy efficient

Specifications

Summary

Detailed Specification

General

Expansion / Connectivity

Power

Miscellaneous

Software / System Requirements

Dimensions & Weight

Environmental Parameters

Find similar

Cookies on BT Business Direct

About cookies

Functional cookies

Targeting cookies

Thanks, you're all set!

Your cookie settings